Armattan Gecko 3-inch FPV Freestyle Quad Frame

Description

Armattan Gecko 3-inch FPV Freestyle Quad Frame
The Gecko is the latest addition to Armattan's family of mini-freestyle frames. Designed around the best principles that brought the Japalura and the Rooster to the front of their fields, this frame gives you the best protection and quality that the multirotor kingdom has to offer. The cage is cut with 6 axis titanium milling. This is a first for Armattan, and it gives the head of this baby a smooth, svelte expression. The aluminum camera saver is a new mounting system designed to protect your camera even in the most crushing of cage crashes. And that's even more important for this frame, because it was designed to safely guard any 19mm micro cam on the market: SD or HD. The stack mounting system is a fresh take on providing options for pilots. You no longer have to choose between an M2 or an M3 board because the Gecko offers provisions for both. While the 20x20, M2, forward stack was designed to be used for a mini HD split camera board (such as the Runcam Split Mini or Caddx Turtle), you can slap any board you want in there. The rear 20x20, M3 mounting holes will be there for your FC, ESC, VTX, or whatever else is left. And with the familiar 22mm deck height you'll find that your batteries are safely out of the line of fire of your props, but are also low enough to bring the center of gravity back down towards your prop-line. The tail provides the quality mounting options that Armattan is known for. A rubber VTX antenna guide channels thinner gauge antennas (up to 1.8mm) upwards, and out of the way of your props. If that doesn't suit your fancy, simply use the elongated M3 holes to zip-tie your dongle in the tried-and-true way instead. Lastly, let's put an end to rear-impact delamination. The carbon itself is protected from impacts by the custom Aluminum standoffs. Includes: Titanium: 2x Camera-cage braces Hardware: 8x 6mm button-head M3 bolts 4x 4mm button-head M3 bolts 4x 16mm buton-head M3 bolts 2x 5mm cup-head M2 bolts 2x M3 sunk nuts Aluminum: 2x Camera-saver braces 1x 19.1mm Front standoff (silver) 2x Rear standoffs (black) Nylon: 4x M3 nuts 2x Washers Carbon Fiber: 1x 2mm Top (LiPo) plate 1x 3mm Main plate (3 inch) Other: 1x Lipo strap 1x LiPo foam pad 4x Dog-bone landing pads 1x Molded rubber VTx antenna holder
Armattan Gecko 3-inch FPV Freestyle Quad Frame
The Gecko is the latest addition to Armattan's family of mini-freestyle frames. Designed around the best principles that brought the Japalura and the Rooster to the front of their fields, this frame gives you the best protection and quality that the multirotor kingdom has to offer.
The cage is cut with 6 axis titanium milling. This is a first for Armattan, and it gives the head of this baby a smooth, svelte expression. The aluminum camera saver is a new mounting system designed to protect your camera even in the most crushing of cage crashes. And that's even more important for this frame, because it was designed to safely guard any 19mm micro cam on the market: SD or HD.
The stack mounting system is a fresh take on providing options for pilots. You no longer have to choose between an M2 or an M3 board because the Gecko offers provisions for both. While the 20x20, M2, forward stack was designed to be uséd for a mini HD split camera board (such as the Runcam Split Mini or Caddx Turtle), you can slap any board you want in there. The rear 20x20, M3 mounting holes will be there for your FC, ESC, VTX, or whatever else is left. And with the familiar 22mm deck height you'll find that your batteries are safely out of the line of fire of your props, but are also low enough to bring the center of gravity back down towards your prop-line.
The tail provides the quality mounting options that Armattan is known for. A rubber VTX antenna guide channels thinner gauge antennas (up to 1.8mm) upwards, and out of the way of your props. If that doesn't suit your fancy, simply use the elongated M3 holes to zip-tie your dongle in the tried-and-true way instead. Lastly, let's put an end to rear-impact delamination. The carbon itself is protected from impacts by the custom Aluminum standoffs.
Includes:
Titanium:
2x Camera-cage braces
Hardware:
8x 6mm button-head M3 bolts 4x 4mm button-head M3 bolts 4x 16mm buton-head M3 bolts 2x 5mm cup-head M2 bolts 2x M3 sunk nuts
Aluminum:
2x Camera-saver braces 1x 19.1mm Front standoff (silver) 2x Rear standoffs (black)
Nylon:
4x M3 nuts 2x Washers
Carbon Fiber:
1x 2mm Top (LiPo) plate 1x 3mm Main plate (3 inch)
Other:
1x Lipo strap 1x LiPo foam pad 4x Dog-bone landing pads 1x Molded rubber VTx antenna holder
×
×
×
×
×
×
×
Buy now and save!
Tell a friend
Visit store
Watch now
Postage info
Click the Postage tab above the listing description for more info
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
You might also like
iCharger 3010B
Power Supply to Banana Plug Cable
AC Power Cable - 3 Feet
XT60 Charge Extension
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© ProgressiveRC
Postage
Click the Postage tab above the listing description for more info
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
eBay integration
by