iFlight Protek35 3.5" Analog Cinewhoop Drone

Description

After the very popular 3 inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series, iFlight decided to increase performance and reduce weight for an even better and longer flight experience for a wide variety of use.
The all-new 3.5 inch project is finally ready for all content creators and pilots who like to wear some protection every now and then. Prop protection is what we're talking about here...
ProTek is not necessarily just a Cinewhoop series but far more. Equipped with the all-new Xing 2203.5 3600KV motors for more power and less heat, iFlight was able to increase speed and thrust by 50% compared to its 3inch predecessor which gives a lot more room for a lot more fun. The GPS measured maximum speed above 120km/h and the maximum thrust of 750g per motor (3kg in total) would easily carry cams even heavier than a GoPro.
A lot of thought was put into the different assembly options. The stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization).
Durable plastic protectors with copper standoffs, portable compact design, easily accessible UBS port without disassembly, LED battery status, lost model buzzer, and a universal GoPro TPU mount for a full size or naked GoPro.
Features
:
No Props or frame in view!
High-performance
True-AIO Board Beast Whoop F7 AIO 45A
to save weight and space
T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
Low Resonance frame construction (Less Jello, more Cinematic footage)
Butter smooth
2203.5 3600KV (4S)
Pre-tuned with smooth freestyle settings
Specifications
:
Board Beast Whoop F7 AIO 45A
Motor: XING 2203.5 3600KV (4S)
SucceX Micro 300mW 5.8GHz VTX
Turbo Eos V2 FPVCam 2.1mm 16:9 NTSC
Wheelbase: 151mm
Body Size: 118*94.5mm
Bottom plate thickness: 3.5mm
Top plate thickness: 2mm
Top and bottom plate spacing: 20mm (aluminum standoff height)
Propeller size: 3.5 inch
FC pattern: 25.5*25.5mm / 20*20mm
FPV cam spacing: 20mm
Weight: 305g (without battery)
- Don't worry about tuning, it's already done for you! A basic PID- and Filter tune was applied for a great flight experience! To restore lost tunes or updates, please check the linked article on
- Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
Includes
:
1x iFlight Protek35 Analog Cinewhoop Drone
2x Nazgul 3535 Propeller set
2x Battery Straps
1x GoPro TPU Mount
Note:  Just add your own receiver and you are good to go.  If you need a receiver, please send us a message.